Конвейер пневматический состоит из прямых и поворотных модулей, станций нагнетания воздуха и пульта управления.
The pneumatic conveyor consists of straight and rotary modules, air injection stations and a control panel.
Conveyor modules consist of supports and an air duct attached to them. The air duct is made of steel profile (st12Х18Н10Т), inside of which air guides are mounted. Air injection stations are mounted on the air duct. Air is pumped using radial fans.
The conveyor is equipped with two pairs of adjustable guides (Fig.) The sliding guides hold the bottle by the neck. When changing the dimensions of the bottle, it is necessary to change the distance (gap) between the guides by releasing the locking screws and moving the guides to the required distance. Orientation guides hold the bottle in the desired flow direction and prevent it from swinging.
When moving bottles of different shapes and sizes, the position of these guides is adjusted, and the bottle must pass freely.
The conveyor is equipped with an electrical cabinet with a control panel. The necessary controls are installed on the remote control. Also, the conveyor, at the request of the customer, is equipped with a combining module (for combining two flows into one) and a bottle dumping device (bottles are dumped into a special box when the pneumatic conveyor is overfilled).
