The MP-62.B.L machine is a linear type automatic machine, which provides the supply of several containers (bottles) lined up in a row into the machine at once.
The filling and capping machine is designed for filling non-carbonated liquid (water) into polyethylene terephthalate (PET) bottles with a capacity of 5000 cm3 to 10000 cm3 and capping them with a plastic screw cap.
MP series machines are used in serial and mass production in the food industry.
All processes of the machine starts after pressing the “Start” – included gearmotor conveyors and orientator cap. Mechanisms are in the initial position in the table.
Products supplied to the feed conveyor. The stopper is in the extended position, blocking the flow shutoff opened. Is filled conveyor Bootle.
Following the discovery of the fifth Bootle cutter works on zadvizhenie carried out clamping neck of the bottles and closing of the blade. Then lowered movement mechanism valves. After reaching the lowest position, the process of filling at the same time in five Bootle in accordance with the parameters set from the operator panel. After time traffic loading mechanism returns the valve to its original position, and then the clamp. On a conveyor belt and opens the stopper has been issuing all five Bootle, while after passing the third one opens Bootle cutter. After the release of the five Bootle occurs stopper closing cycle is completed and begins filling zanovo.Podavaemye Bootle conveyor fed to the closure.
After filing a Bootle on the closure triggered stopper, then there is a fixing nip in the region of the neck and the base. Oriented caps come on a tray to transfer mechanism caps that captures and moves them one by inserting a closure head, then the motion of the closure head (lowering and rotation) in the process of tightening the cap.
At the end of the closure head twisting the cap rises, waste clamps and Bootle moves through the pipeline a recovery to the applicator, adhesive label on the bottle.