• Call me
  • 17, Sukhoyarskaya str., Belaya Tserkov, Kiev region, Ukraine

UMT-600A-06KHP (2M)

  • 03/31/2015


  • Productivity, ppm


  • Capacity, kW


  • Electric power supply, V/Hz


  • Machine dimensions, mm


  • Weight, kg


  • Pneumatic power supply, MPa


  • Dimensions of the received packet, mm


UMT-600A is designed for group product packing into shrinking film.
The machine is automatic and doesn’t need the permanent operator’s presence.


The main components (subassemblies) of UMT-600A-06KXP(2M) are:

• Bundle forming device (former); 
• Packing device (packer).
• Thermo chamber
• Board of controls

The former collects and forms the bundle. 
Film cutting, film welding and portioned offsetting as well as the package wrapping are made in the packer. Film shrinking is made in the thermo chamber. 
Controls in the board of controls operate the machine automatically. All needed controls are placed on the control panel.

UMT-600A-06KXP(M) machine operation is based on shrinking film ability to reduce because of temperature. 
All forming and packing devices of the UMT-600A-06KXP(M) machine are operated by controller in accordance with its program.

The belt input transporter carries the bundle to the pusher. Pusher passes the bundle on the step transporter. 
In accordance with the customer’s technical specification the bundle is consisted of five cells and two rows. The pusher on the step transporter gets the bundle to the packing area.

After the pushing the bundle is fixed with lateral and upper clips on the table.
The electric knife cuts and welds film. The following bundle pushes the ready bundle on the thermo tunnel transporter.

The wrapped bundle goes through the thermo tunnel and film is shrunk here. 
At the exit the bundle is ventilated to speed up cooling and stabilization. Then the ready bundle gets on the roll table.