Labelling machine MPPE-3 000A
- 03/31/2015
Description
-
Productivity, bph
3000
-
Capacity, kW
7
-
Compressed air consumption, L/min
85
-
Machine dimensions, mm
3840х1665х2014
-
Weight, kg
850
-
Pneumatic power supply, MPa
0,45-0,6
-
Bottle’s diameter, mm
45–150
-
Label material, mcm
polipropilen 35–40
-
Label height, mm
50-150
-
Glue consumption
1 kg for 15 000 labels
MPPE-3000A - machine is designed for circular or segmental the polypropylene label gluing from the roll onto the cylindrical (PET or 0,5-2 l glass bottle) containers.
COMPONENTS
1. Electric box
2. Turnstile star
3. Stream cutter
4. Guiding rail
5. Running rail
6. Adjusting block
7. Transporter
8. Gluing device
9. Main drive
10. Vacuum drum
11. Label cutting device
12. Delivery and pressing rolls
13. Running rolls
14. Roll table
15. Vacuum pump
16. Console
17. Rotameter block
18. Vacuum tubing taps
19. Air preparing block
20. Gearbox
21. Mark sensor
22. Block sensor “No label-no glue”
23. Block sensor “Label on drum”
There are guiding rolls and adjusting blocks with mark sensor between the input device and the label roll.
The machine monitoring system controls the label length.
The cutter device divides the label strip into separate labels. They are hold on the cutting drum by vacuum and then brought to the carrying drum by the compressed air. The carrying drum drives each label through the gluing roll of the gluing device. Thermal glue is put on the label there.
The label with glue moves on the vacuum drum towards the bottle that is delivered by the turnstile star. In starting position, the stream cutter is closed. When the stream cutter is open the turnstile star gets the bottle and drives it to the glue zone.
The bottle meets the label that is placed on the vacuum drum. The vacuum drum presses the bottle to the running guide and rolls it.
The bottle with the label is being transported to the machine output end.
